Protect work area from spills. Clean and dry surfaces to be bonded. To open, place cap on neck and turn the cap & nozzle firmly clockwise (until the white base of cap is not visible and you’re not able to turn it any further). Once the nozzle is firmly in place, turn the blue cap anticlockwise by gripping the ridges of the cap. To dispense, squeeze the sides of the bottle. The harder you squeese, the more glue will dispense Apply a small amount of Gorilla Micro Precise to one surface. Only one drop per 6.5cm2 recommended. Set time can vary based on amount of glue and surface type. Excess glue can cause delayed or failed bond. press the two surfaces together for 10-45 seconds. Wait 24 hours for full cure. After using, clean nozzle with a dry cloth and replace outer cap.
Gorilla Micro Precise Liquid Superglue 5g
£7.06 ex-vat £8.47 inc-vat
- Impact-Tough™ – Formulated for impact resistance and strength
- Fast setting – Dries in just 10-45 seconds, with no gripping required
- Anti-clog cap – Keeps Super Glue from drying out. It’s Gorilla tough, use after use
- Bonds metal, wood, ceramic, paper, rubber, plastics* and more! *Not suitable for polypropylene (PP) or polyethylene (PE)